MX Graphic Kit Kawasaki KX 65
Design your own Kawasaki KX 65 Graphics kit with our design configurator. The KX65 is one of the most popular 65cc two-stroke dirt bikes for beginners who want to race motocross. Since the 1998, the KX65 has remained unchanged. In our configurator you can select and design all Kawasaki KX65 dirt bikes from the different year models from 1998 to 2019!
Applying The Graphics :
# The easiest way to do it is to attach your plastics on your bike, then you have to Do not hold plastic parts and can concentrate entirely on the positioning of your graphic!
# When fitting, we recommend orienting yourself to the screw holes and closing them properly position, then the rest should fit by itself!
# If the part to be glued has no screw holes, then you can, as shown in our graphic above Cut the carrier film and gradually remove it after positioning!
# After positioning, it is important that the stickers are firmly pressed on. The harder you press them, the better they hold!
# To make it even easier for you, there is a backyard design squeegee with every complete decor!
Compensate for the last bumps on the adhesive edges with the addition of heat and with a squeegee and press down firmly. Finally, use the hot-air dryer to warm up all the graphics again, especially on the curves, and press firmly so that the adhesive can develop its best effect. Leave the fully applied bike in place for 24 hours and ideally at room temperature and touch it up the next day if necessary, warm it up with a hair dryer and press it on for the last time!
Backyard Design USA 